|
Publications:
Journal Papers:
ZHANG, L. C. and
MAHDI. M., (1995a),
Applied Mechanics in Grinding, Part IV: Grinding
Induced Phase Transformation. Int. J. Mach.
Tools Manuf.,
35/10, (1995) 1397‑1409.
MAHDI, M. and ZHANG,
L. C., (1995b),
The Finite Element Thermal Analysis of Grinding
Processes by ADINA, Computer & Structure,
56, (2/3) (1995) 313-320.
ZHANG L. C and MAHDI,
M, (1996a),
Plastic Behaviour of Silicon Subjected to
Micro-Indentation,
Journal of Materials Science, 31/21 (1996) 5671-5676.
MAHDI, M. and ZHANG,
L., (1997a),
Applied Mechanics in Grinding-V: Thermal Residual
Stresses, Int. J. Mach. Tools Manufact.,
37/5 (1997) 619-633.
MAHDI, M. and ZHANG,
L., (1997b),
Applied Mechanics in Grinding , Part VI: Residual
Stresses and Surface Hardening by Coupled Thermo-Plasticity and Phase
Transformation, Int. J. Mach. Tools Manufact,
38/10-11 (1998) 1289-1304.
MAHDI, M. and ZHANG,
L., (1999a),
Residual Stresses in Ground Components Caused by
Coupled Thermal and Mechanical Plastic Deformation, Submitted in May 1998
to Journal of Materials processing
Technology.
MAHDI M. and ZHANG
L.,
(1999b) Applied Mechanics in Grinding, Part 7:
Residual stresses induced by the full coupling of mechanical deformation,
thermal deformation and phase transformation, International Journal of
Machine Tools and Manufacture,
1999, 39: 1285-1298.
MAHDI, M. and ZHANG, L.,A
Numerical Algorithm for the Full Coupling of Mechanical Deformation, Thermal
Deformation and Phase Transformation in Surface Grinding,
Computational Mechanics,
2000, 26/2 148-156.
MAHDI, M. and ZHANG, L.,
An adaptive
three-dimensional finite element algorithm for the orthogonal cutting of
composite materials, Journal of Materials
Processing Technology,
2001, 113/1, 368-372.
MAHDI, M. and ZHANG, L.,
A finite element model
for the orthogonal cutting of fiber-reinforced composite materials,
Journal of Materials Processing Technology,
2001, 113/ 1, 373-377.
Conference
Papers:
ZHANG L. and MAHDI
M. (1994), A Numerical Investigation into The Micro-Indentation of
Silicon, International Ceramic Monographs, International Conference,
Sydney, Australasian Ceramic Society, 2, (1994) 644-650.
MAHDI. M. and ZHANG.
L., (1994),
Correlation Between Grinding Conditions and Phase
Transformation of An Alloy Steel,
Proceedings of advanced computational methods in heat transfer III,
, August, (1994) 193-200.
MAHDI, M., and
ZHANG, L., (1996b), A Theoretical Investigation on The Mechanically
Induced Residual Stresses Due to Surface Grinding, Progress of
Cutting And Grinding, JSPE, , III, International
Conference on Progress of Cutting and Grinding (1996) 484-487.
MAHDI, M. and ZHANG, L., (1997c), An
Adaptive Method for Predicting Residual Stresses Associated With Grinding
Induced Phase Transformation, The 12th annual meeting of ASPE,
October 5-10, (1997) 303-306.
MAHDI M and ZHANG
L., (1998c), Residual Stresses in Ground Components: Fully Coupled
Thermo-Mechanical Deformation and Phase Transformation, Proceedings
of International Conference on Progress of Cutting and Grinding, Urumqi
and Turpan, China, 5-9 October (1998) 453-458.
MAHDI M and ZHANG
L., (1998d), Residual Stresses in Ground Components: Effect of
thermo-mechanical deformation, Proceedings of International
Conference on Progress of Cutting and Grinding, Urumqi and Turpan,
China, 5-9 October(1998) 447-452.
MAHDI, M. and ZHANG, L., (1999a),
Residual Stresses in Ground Components: Distribution Effect of Surface
Traction, The Second Australasian Congress on Applied Mechanics,
Canberra, Australia, 10-12 February (1999).
MAHDI, M. and ZHANG, L., (1999b), A
Numerical Treatment for the Coupling of Mechanical Deformation, Thermal
Deformation and Phase Transformation in Surface Grinding, ABTEC’99
International Conference on Abrasive Technology, November 21-23,1999
Brisbane, Australia.
MAHDI, M. and ZHANG, L., (1999c),
Simulation of Orthogonal Cutting: The Effect of Separation Criteria and
Cutting Tool Geometry, ABTEC’99 International Conference on Abrasive
Technology, November 21-23,1999 Brisbane, Australia.
Mahdi, M, On the Modelling of the
Material Processing by the Finite Element Method: Applications in Grinding
and Cutting Processes, Proceedings of the 4th Jordanian
International Mechanical Engineering Conference, JIMEC 2001, Amman,
Jordan.
M. Abdel-Jaber, S. Al-Sadder, A. Shatnawi,
M. Mahdi, "Equilibrium Configurations of Heavy Elastica Beams Under
Unilateral Contact Constraints", in B.H.V. Topping, M. Papadrakakis,
(Editors), "Proceedings of the Ninth International Conference on
Computational Structures Technology", Civil-Comp Press, Stirlingshire, UK,
Paper 210, 2008. doi:10.4203/ccp.88.210 |
